Payment & Shipping Terms:
|Another Name:||Polishing Machine||Gross Weight:||1600 KG|
|Air Pressure:||0.6 MPA||Voltage & Frequency:||380V|
|Average Buffing Time:||3 Min||Size:||1600mm*2700mm*1800mm|
Full-automatic Tyre Buffing Machine For Tire Retreading New Generation
Concepts of cold retreading:
The low temperature is against the high hot retreading temperature. Generally, 120°C is the denatured point of rubber, over called hot retreading, blow called cold retreading. And more advanced technology allows the temperature below 100°C. Because of the high temperature produce a negative effect to the tyre, the cold retreading is more and more popular.
Precure retreading means the tread should be procured by the high-pressure vulcanizing machine separately, while the hot retreading means the tread and casing are made up with non-vulcanized rubber, so the tread pressure is far below than the cold retread technology. Therefore, wear resistance, mileage of cold retread tyre can be comparable to the new tires, and flat mould can make tread with kinds of patterns, help the users to choose the more suitable patterns. However, it will be a big expense if you change tread patterns with hot retreading technology.
1, cleanness and dry of casing
Before retreading, outer and inner surface should be cleaned for good adhesion strength. Drying is also essential because the water in casing would affect the retreading quality.
16'',17.5'',18'', 19'', 22.5″,23" Automatic Buffing Machine
Top of the child will be old tires, polished by the provisions of the renovation process of the tread arc curvature of the scope of polished 400 ~ 750mm, can be polished to a specific curvature, configuration, 16", 17.5 ", 18'', 19'', 22.5" tires splint, with vacuum devices, edge devices sidewall.
Besides tire buffing machine,we can supply you whole production line of tire retread machine, like autoclave,tread building machine,tire expanding & repairing machine,envelop spreader,rim changer,tire conveyor,rubber cement blender, dust collector,etc.
Contact Person: zeng