Payment & Shipping Terms:
|Another Name:||Inspection Machine / Tire Retreading Machine||Gross Weight::||2000kg|
|Air Pressure:||1.0MPA/ 1.2MPA/ 1.4MPA||Voltage & Frequency:||380V|
tyre curing chamber,
tyre buffing machine
Pressure Testing Machine For Tire Retreading Machine Energy saving
Parts of retread process:
1, cleanness and dry of casing
Before retreading, outer and inner surface should be cleaned for good adhesion strength. Drying is also essential because the water in casing would affect the retreading quality.
2, tyre inspection
Not all the used tyres can be retreaded, different standard for different conditions. Some defects can be found directly by the experienced operator, but some inner ones can only depend on the inspection of equipment and devices.
Obtained tire surface with a certain profile and adhesion after buffing. It should be stressed that this is a crucial process, because unqualified tire size, roughness, or roundness would affect the quality of retread tires.
Standard function description:
1, Use monitor to observe the tire, the operator keep away from the testing machine, handling safety.
2, The monitor with video storage function, can record one month testing video.
3, The testing machine with protecting wire net, testing process in the totally enclosed protecting wire net, even if the tire explode, operator is safety.
4, Punching process do not have to install inner tube. Assemble and disassemble tire is convenient and fast, detection efficiency.